Our Manual Tabletop Manual Helium Bombing Station features an ASME helium pressure chamber made of stainless steel with removable lid and swing clamps for easy access for loading. Bombing chamber is leak and pressure tested for full vacuum and operating pressures up to 100 psi. Also included is a dry vacuum pump rated at 3.5 CFM, 15 Torr or 29 inHg ultimate pressure. System includes vacuum hoses and connections between chamber and pump, and is mounted on a white powder coated tabletop base.

  • ASME approved for 110 psi
  • Setup is helium leak tested to less than 10-9 atm-cc/sec
  • Includes Certificate of Conformance
  • Tabletop base (15" W x 16" L)
Chamber Material:
304 stainless steel with electro-polished finish
Chamber Dimensions:
9.5" diameter x 9.5" height (inside)
System Height:
17-1/4" overall
Chamber Lid:
Fully removable with handle and secured with swing clamps suitable for both vacuum or pressure
Chamber Rating:
Leak and pressure tested for full vacuum and operating pressures to 100 psi
Chamber Ports:
  • 1/4" port on cross with manual valve adapted to NW 25 vacuum flange for evacuation
  • 1/4" port on cross for helium fill manual valve to connect to regulated helium supply
  • 1/4" port on cross for manual valve for venting chamber

Safety Valve:
Safety over-pressure relief valve installed and set to 100 psi
Pressure Gauge:
Manual analog 2.5" face pressure gauge—0-30 inHG and 0-100 psi
Vacuum Pump (Dry):
  • Rated at 3.5 CFM, 15 Torr, or 29 inHg ultimate pressure
  • 120V / 60Hz / 450 Watts — includes silencer/muffler


No accessories available.

Product Brochures

Helium Bombing Chambers
Helium Bombing Stations
ATLAS Leak Test Process Controller & Helium Charger

Application Notes

Application Note 01-06: Helium Leak Testing of Small Sealed Parts (Bombing)

Manuals / User Guides

Helium Bombing Chambers - User Guide