Primary Pump | Dry membrane (2) | (mounted in bottom) |
Pumping Speed Capacity | 3.6 m3/h | 2.1 CFM |
Dimensions (W x H x D) | 559 x 607 x 305 mm | 22.0 x 23.9 x 12.0 in |
Weight | 42 kg | 93 lbs |
Operating Temp – Vacuum Method | 0 – 45 °C | 32 – 113 °F |
Operating Temp – Sniffing Method | 0 – 40 °C | 32 – 104 °F |
Electrical Supply (50/60 Hz) | 90 – 250 V~ |
Electrical Power (Max) | 600 W |
Detectable Gases | Helium 4 | Helium 3 | Hydrogen |
Min. Detectable Leak Rate – Vacuum Method (Helium) | 5 x 10-12 mbar L/sec | atm cc/sec |
Min. Detectable Leak Rate – Vacuum Method (Sniffing) | 5 x 10-9 mbar L/sec | atm cc/sec |
Max. Inlet Pressure – Vacuum Test Modes | GROSS – 25 mbar | FINE – 5 mbar | ULTRA – 0.5 mbar (GROSS – 19 Torr | FINE – 4 Torr | ULTRA – 0.4 Torr) |
Test Methods | Vacuum (includes AutoTest) | Sniffing |
Helium Pumping Speed | 2.5 L/sec (ULTRA mode) |
Protection Category | IP 20 |
Inlet Flange | DN 25 ISO-KF |
Start-up Time | ≤ 3 minutes |
Accessory Interfaces | USB port | Barcode | Accessory 1&2 | Wireless remote control | Wired remote screen |
Communication Options | Serial ports: RS-232 | RS-485 | Ethernet |
I/O Options | Remote I/O | Local I/O |
No accessories available.
To request a quote from LACO Technologies, fill out the form on this page. Once you’ve submitted the form you will receive an email confirmation and will be able to access your submission through your customer dashboard.