- Home
- »
- Custom Solution | TITANTEST™ Production Leak Test System with High Pressure Helium Cylinder
Custom Solution | TITANTEST™ Production Leak Test System with High Pressure Helium Cylinder
PART NUMBER:
X-1P25185
A manufacturer of A/C and temperature control components required a low volume production leak test system. Because their leak test process required high pressure helium, we engineered a custom cart to accommodate the cylinder. With all system components mounted on a portable cart, this system provides powerful leak testing with a TITANTEST P-Series Helium Leak Detector.
KEY FEATURES
- TITANTEST P-Series Leak Detector includes high-capacity oil mist eliminator, high-capacity inlet filter, proprietary autotest software, and a powerful remote interface protocol
- Portable cart system with custom designed accessory to hold a 7″ high pressure helium cylinder
- TITANTEST P-Series leak detector includes:
- Three leak test modes (Gross, Fine, Ultra)
- Three test methods (Vacuum, Sniff, Auto Test)
- Auto-calibration with built-in helium calibrated leak standard
- Audio alarm
- Flexible I/O interface with external vacuum pump control and helium gas charge integration
- Two serial communication protocols
- AutoTest method allows for semi-automatic and fully automatic leak testing
- Two-year warranty on the unit, plus 3-year enhanced warranty on the analyzer cell
SPECIFICATIONS
| Minimum detectable helium leak rate (ultra fine vacuum mode): | <5 x 10-12 atm.cc/sec |
| Minimum detectable helium leak rate (sniffing mode): | 5 x 10-8 atm.cc/sec |
| Maximum inlet pressure: | 25 mbar |
| Inlet helium pumping speed (ultra-fine mode): | 2.5 L/sec |
| Roughing pump capacity: | 3.5 CFM Rotary Vane Pumps |
| Inlet test port configuration: | NW25 |
| Detectable gases: | He4, He3, and H2 |
| Start-up time: | < 3 minutes |
| Response time: | < 0.5 seconds |
| Ambient operating temperature: | 50° F to 96° F |
| Operating voltage (single phase): | 115/230 VAC, 50/60 Hz |
| Approx. weight (bench-top model): | 100 lbs.* |
| Approx. dimensions (bench-top model): | 22″ L x 18″ W x 12″ H* |
| Interface: | RS232 or RS 485, Analog Output |
ACCESSORIES
No accessories available.
RESOURCES
Technical Note A: Production Leak Testing: What, Why and How
Related Products
Related products
-
Custom Solution | Horizontal Cylindrical High Vacuum Chamber for Product Part Testing
Read more -
Custom Solution | Force Decay Leak Test System for Body Armor
Read more -
8″ x 12″ Tabletop Package Testing System
$2,735.00 Add to cart -
Custom Solution | High Vacuum System for Semiconductor Product Manufacturing
Read more
