Custom Solution | Thermal Vacuum Degas System for National Laboratory

SKU:

X-1P33792

A national laboratory required a custom heavy-duty, cart-mounted thermal vacuum degas system featuring a mobile cart and removable panels for easy access to system components. We engineered a solution comprised of a 15” DIA x 15” H vacuum chamber with a clear acrylic lid mounted in a ruggedized cart. This thermal vacuum degas system is designed for simple, trouble-free temperature and vacuum control via a custom controller – developed to seamlessly work with components such as heating elements, thermocouples, and vacuum feedthroughs.

Custom Solution | Thermal Vacuum Degas System for National Laboratory

Custom Solution | Thermal Vacuum Degas System for National Laboratory image 1

Custom Solution | Thermal Vacuum Degas System for National Laboratory image 2

Custom Solution | Thermal Vacuum Degas System for National Laboratory image 3

Custom Solution | Thermal Vacuum Degas System for National Laboratory image 4

IndustriesAerospace Chemical & Gas Defense Electronics Food & Beverage Laboratory / R&D Medical Power & Energy Vacuum Technology

Heavy duty, ruggedized mobile cart
15” DIA x 15” H stainless steel vacuum chamber
Custom HVC-1000 heater and vacuum controller
External cylindrical band heaters
FM approved over-temperature protection
Quick start/stop toggle switch for heater
Adjustable setpoint control
Convection gauge controller with digital pressure display

Chamber Dimensions:	15″ DIA x 15″H
Vacuum Chamber:	Custom VI Series Industrial
Approximate Volume (in³):	2650
Vacuum Rating:	10 x 10^-3Torr
Chamber Material:	304 Stainless Steel
Lid Material:	1.5” thick clear acrylic
Seal Type:	Buna L-gasket
Lid Configuration:	Vertical hinge and shock support
Vacuum Port:	3/4” NPT
Vent Port:	1/2” NPT
Gauge Port:	1/4” NPG
Controller:	Custom HVC-1000
Pumping System:	14 CFM, two-stage, oil-sealed RVP
Vacuum Gauge:	InstruTech^® Stinger digital gauge
Heaters:	Cylindrical band capable of holding 93 °C +/-1 °C wall temperature

W2V40 14 CFM Two Stage Rotary Vane Pump

The W2V40 rotary vane vacuum pump features a rugged, two-stage, air-cooled design and is capable of pumping speeds of 14 cfm and producing an ultimate vacuum of 10-3 Torr. Lightweight, quiet, and compact, the W2V40 has an anti-suckback and gas...

IndustriesAerospace Chemical & Gas Defense Electronics Food & Beverage Laboratory / R&D Medical Power & Energy Vacuum Technology

Related Products

Vacuum Degassing Systems

12″ X 18″ Tabletop Degassing System (Dry Pump / 3.5 CFM)

LACO Custom Standard Tabletop Vacuum Degassing System provides an economical and efficient solution to your degassing application

Features

Clear acrylic chamber vacuum chamber for full visibility
3.5 CFM UN-250VH dry piston pump ideal for clean room applications
Manual vacuum valve for full control of vacuum pump-down
Manual vent valves prevent overflows during compound degassing
All items installed onto a 24″ x 18″ tabletop base
Includes appropriate packaging for shipping system safely and efficiently to customer destination

Resources

Vacuum Degassing Systems

12″ X 18″ Cart Degassing System (Two Stage / 6 CFM)

Our standard two-stage cart-mounted vacuum degassing system offers an efficient and portable solution for degassing compounds such as epoxies, urethanes, and resins. This complete system includes a two-stage rotary vane pump, 12″ x 18″ vacuum chamber, and manual valves for full control. Built on a rugged steel cart with locking casters.

Features

12″ DIA x 18″ H Series VI Vacuum Chamber
6 CFM pumping speed
Two Stage Oil-Sealed Rotary Vane Pump and digital vacuum gauge ideal for degassing epoxies
Portable system mounted on heavy-duty painted carbon steel frame cart with locking casters
Manual vacuum valve for full control of vacuum pump-down
Manual vent valves prevent overflows during compound degassing

All prices are in US$. Website pricing is good only for the USA. Please call for International pricing.

Resources

Vacuum Degassing Systems

12″ X 18″ Cart Degassing System (Two Stage / 14 CFM)

Features

12″ DIA x 18″ H Series VI Vacuum Chamber
14 CFM pumping speed
Two-stage, oil-sealed rotary vane pump and digital vacuum gauge ideal for degassing epoxies
Portable system mounted on heavy-duty painted carbon steel frame cart with locking casters
Manual vacuum valve for full control of vacuum pump-down process
Manual vent valves prevent overflows during compound degassing

Resources

Vacuum Degassing Systems

12″ X 18″ Cart Degassing System (One Stage / 15 CFM)

Features

12″ DIA x 18″ H Series VI Vacuum Chamber
15 CFM pumping speed
Single stage, oil-sealed rotary vane pump and digital vacuum gauge
Portable system mounted on heavy-duty painted carbon steel frame cart with locking casters
Manual vacuum valve for full control of vacuum pump-down
Manual vent valves prevent overflows during compound degassing

Resources

Vacuum Degassing Systems

18″ X 20″ Cart Degassing System (Two Stage / 14 CFM)

Our standard two-stage cart-mounted vacuum degassing system offers an efficient and portable solution for degassing compounds such as epoxies, urethanes, and resins. This complete system includes a two-stage rotary vane pump, 18″ x 20″ vacuum chamber, and manual valves for full control. Built on a rugged steel cart with locking casters.

Key Features

LACO’s 18″ DIA x 20″ H – Series VI Vacuum Chamber
14 CFM pumping speed
Two-stage oil-sealed rotary vane pump and digital vacuum gauge ideal for degassing epoxies
Portable system mounted on heavy-duty frame with locking casters
Manual vacuum valve for full control of vacuum pump-down
Manual vent valves prevent overflows during compound degassing

Resources

Vacuum Degassing Systems

18″ X 20″ Cart Degassing System (One Stage / 15 CFM)

Our standard single-stage cart-mounted vacuum degassing system offers an efficient and portable solution for degassing compounds such as epoxies, urethanes, and resins. This complete system includes a single-stage rotary vane pump, 18″ x 20″ vacuum chamber, and manual valves for full control. Built on a rugged steel cart with locking casters.

Key Features

18″ DIA x 20″ H LACO Series VI Vacuum Chamber
15 CFM pumping seed
Single-stage oil-sealed rotary vane pump and digital vacuum gauge
Portable system mounted on heavy-duty frame with locking casters
Manual vacuum valve for full control of vacuum pump down
Manual vent valves prevent overflows during compound degassing

Resources

Vacuum Degassing Systems

8″ X 12″ Tabletop Degassing System (Dry Pump / 3.5 CFM)

The Tabletop Vacuum Degassing System is an economical and efficient solution for degassing compounds like epoxies, resins, and silicones. Ideal for benchtop and clean room applications where visibility and cleanliness matter.

Features

8″ x 12″ clear acrylic vacuum chamber for full visibility
UN-250VH dry piston pump 3.5 CFM ideal for clean room applications
Manual vacuum valve for full control of vacuum pump-down
Manual vent valves prevent overflows during compound degassing

Resources

Vacuum Degassing Systems

8″ X 10″ Tabletop Degassing System (Two Stage / 3 CFM)

The Standard Two-Stage Tabletop Vacuum Degassing System is an economical and efficient solution for removing air and moisture from compounds like epoxies, silicones, and resins. Ideal for benchtop and clean room applications.

Key Features

8″ DIA x 10″ H LACO Series VI Vacuum Chamber
Two Stage Oil-Sealed Rotary Vane Pump and digital vacuum gauge ideal for degassing epoxies
Manual vacuum valve for full control of vacuum pump-down
Manual vent valves prevent overflows during compound degassing.
Includes packaging for shipping system safely and efficiently to customer destination

Resources

Vacuum Degassing Systems

6″ X 9″ Tabletop Degassing System (Two Stage / 3 CFM)

Key Features

6″ DIA x 9″ H LACO Series VI Vacuum Chamber
Two Stage Oil-Sealed Rotary Vane Pump and digital vacuum gauge ideal for degassing epoxies
Manual vacuum valve for full control of vacuum pump-down
Manual vent valves prevent overflows during compound degassing
Includes packaging for shipping system safely and efficiently to customer destination

Resources

Frontier Bake-Out Systems

High Vacuum Bake-Out System for Degassing Military and Commercial Aerospace Electrical Parts

System Platform: Custom 24″ Cube High (CH) Vacuum Chamber features a stainless steel body and front-loading hinged swing door with clamp closure
System Enclosure: Ruggedized frame w/heavy-duty casters and electrical panel enclosure
Process Controller: HVC-3500 Thermal Vacuum Controller provides automated vacuum and temperature control
Shelf: three adjustable shelves/trays for customer parts
Pump Package: W2V80 Two Stage Oil Sealed Rotary Vane Pump with exhaust filter and NW style metal vacuum hose and High Vacuum turbo Pump
Heating System: Eexternally heated wall design located on top, bottom, and both sides. Door is not heated.

Vacuum Degassing Systems

Custom Solution | Automated Vacuum Degassing System

Pneumatic actuated lid lift via manual actuating valve — allowing lid to move up, down, and side-to-side rotation.
Electrical mixer mounted on lid with variable speed drive and manual controller
Internal disc heater with electrical and thermocouple feedthroughs
RTD probe installed in lid for immersion into test product for use as the temperature control point for the disc heater
HVC-3500 Thermal Vacuum Controller provides automated vacuum and temperature control, customizable software, and adjustable test recipes. Controller provides ability to record both pressure and temperature, automate timer based on temperature, and automatic shutoff

Vacuum Degassing Systems

Custom Solution | Degassing Chamber for Filling Valve Cartridges

Custom aluminum chamber with acrylic hinged door and door switch
Servo motor and controller with Ferrofluidic vacuum rated feedthrough and ball screw mechanism designed to raise and lower the cartridges
Door mounted signal automatically initiates process
System designed for up to 500 cycles per day
Vent and evacuation ports
Digital vacuum gauge

Vacuum Degassing Systems

Custom Solution | Cart Vacuum Degassing System for NASA Epoxy Parts

Integrated vacuum system with a two stage oil-sealed rotary vane vacuum pump and trap all mounted on a common base
Manual vacuum valve and vent valves enable full control of the vacuum pump down and quick venting to prevent overflows during the degassing of compounds

Vacuum Degassing Systems

Custom Solution | Automated Cart Vacuum Degassing System for Liquid Polymers

Large, 165-gallon capacity vacuum chamber with lift and swing hinged lid
Load cells on chamber with display
Sight glass ports with shutoff valves
High and low sensors
High vacuum gauges
Automatic valves for fill and draining

Vertical Cylindrical Vacuum Chambers

Custom Solution | Vacuum Degassing System for High Volume Oil

Vacuum Degassing System for High Volume Oil
Large stainless steel vacuum chamber holds from 3 to 55 gallons of liquid
Liquid level sensors to prevent overfilling
Large viewport in lid to monitor degassing
Oil supply and drain lines

Custom Vacuum Degassing Options

LACO can provide a range of custom features on vacuum degassing systems, including:

Support for bulk oils and 55-gallon drums
Vacuum-rated electric mixers
Heated chamber configurations
Fully automated PLC-controlled systems

Vertical Cylindrical Vacuum Chambers

Custom Solution | Vacuum Degassing Chamber for High Viscosity Medical Products

High-power electric mixer with rotary shaft feedthrough and variable speed control
Medical-grade #4 grain mechanical polish on interior and exterior surfaces
Based on the Series VI vertical industrial vacuum chamber architecture
Custom drain port for controlled discharge of high-viscosity materials
Elevated chamber feet for improved cleaning and ergonomic access

Vacuum Degassing Systems

Custom Solution | Cart Vacuum Degassing System for High Volume Oil

24″ DIA x 36″ H Series VL vertical vacuum chamber with dished bottom and a 2″ clear acrylic, hinged lid with air shocks for lid lifting assistance
Custom ports and feedthroughs include oil fill port, sight glass view ports to monitor oil levels, helium backfill port, and oil drain port

Automated Vacuum Degassing for Polyurethane

Vacuum Degassing Systems

Custom Solution | Automated Cart Vacuum Degassing System for Polyurethane Products

Custom size Series VI vertical industrial vacuum chamber with custom ports.
Chamber lid features a hinged mount with air shocks for lid-lifting assistance and u-bolt clamps for positive pressure lid hold down and front mounted lid handle

Vacuum Degassing Systems

Custom Solution | Automated Cart Vacuum Degassing System for R&D

Fully integrated vacuum degassing system includes Series VI Vertical Industrial vacuum chamber, single stage rotary vane vacuum pump, InstruTech® Stinger Digital Vacuum Gauge, clear trap, oil mist eliminator, and all related hoses and connectors mounted on portable cart .
18″ X 20″ Vacuum Chamber features custom port locations, two double-suction cup style lid handles, and is large enough to contain a 5-gallon bucket
VC-1000 Vacuum Controller integrates the vacuum gauges and vacuum valves based on adjustable setpoint from vacuum gauge using relay logic. Features include automatic setpoint control, manual vent and evacuation, and auto evacuation
Manual vacuum valve for full control of vacuum pump-down
Manual vent valves prevent overflows during compound degassing

Vacuum Degassing Systems

Custom Solution | Cart Vacuum Degassing System for Epoxy

Fully integrated vacuum degassing system includes Series VI Vertical Industrial vacuum chamber, two stage rotary vane vacuum pump, InstruTech® Stinger Digital Vacuum Gauge, clear trap, oil mist eliminator, and all related hoses and connectors mounted on portable cart
18″ X 20″ Vacuum Chamber features custom port locations, hold-down clamps, and is large enough to contain a 5-gallon bucket
Custom sized heavy-duty extruded aluminum frame cart with locking casters

Vacuum Degassing Systems

Custom Solution | Automated Tabletop Vacuum Degassing System for R&D

Fully automated tabletop vacuum degassing system
VC-2500 Vacuum Controller integrates the vacuum gauges and vacuum valves for automated mode operation or for safe, interlocked manual mode. Controller features programmable evacuation, vent and hold conditions, up to 20 test recipe configurations, data logging and storage.

Vacuum Degassing Systems

Custom Solution | Vacuum Degassing System for Defense Components

Fully integrated vacuum degassing system includes 12″ X 12″ Cube Industrial Vacuum Chamber, two-stage oil-sealed rotary vane vacuum pump, InstruTech^® SuperBee digital vacuum gauge, clear trap, oil mist eliminator, and all the related hoses and connectors mounted on a mobile cart
VC-1000 Vacuum Controller integrates the vacuum gauges and vacuum valves based on an adjustable setpoint from the vacuum gauge using relay logic. Features include automatic setpoint control, manual vent and evacuation, and auto evacuation
Manual vacuum valve for full control of vacuum pump-down
Manual vent valves prevent overflows during compound degassing

Vacuum Degassing Systems

Custom Solution | Thermal Degassing System for Aerospace Components

Degassing system with full thermal control using swivel-mounted HVC-3500 Thermal Vacuum Controller to control external, insulated cylindrical band heaters capable of 150 °C.
System features a custom 18″ X 20″ Vertical Industrial (VI) Chamber with vertical hinged lid with shock supports, hold-down clamps (rated for full vacuum and positive pressure to 15 psi), 6″ DIA glass viewport, and internal lighting
Removable rotary table with 21″ diameter located in bottom of chamber with rotary shaft feedthrough for DC motor with motor control box with on/off switch and speed control for positioning of product.
Custom ports and feedthroughs to support lighting, power, and barb fitting for customer material to be fed into chamber
Full on-site installation, training, and buy-off package

Multi-Chamber Vacuum Drying & Coating System for Electronics

Vacuum Degassing Systems

Multi-Chamber Vacuum Drying and Coating System for Electronic Components

Vacuum drying & coating for electronics
High volume coating and deposition chamber with flat rail system, turntable and manual pins for locking roller cart
Roller rack carts with 30 expanded 304 stainless steel trays, including include supports to reduce flexing upon load.
Insulated vaporization chamber with external heated walls (clam shell heaters) and internal heated aluminum platen with cooling channels for water or air cooling and chiller for fast cooling of platen.
High volume degas chamber with aluminum frame stand with leveling feet for interfacing with system frame
Flat-rail system for roller cart movement
Insulated pyrolization chamber with single zone heating to 600 °C

Vacuum Degassing Systems

Custom Solution | Thermal Degassing System for Energy Components

Custom 30″ DIA x 15″ H stainless steel vacuum chamber with internal shelf and heating element
HVC-3500 Thermal Vacuum Controller provides automated vacuum and temperature control, customizable software, and adjustable test recipes. Controller provides ability to record both pressure and temperature, automate timer based on temperature, and automatic shutoff.
Integrated, portable degas system includes pump, chamber, gauges, oil mist eliminator, trap ,spare components, vacuum oil, and all related hoses and fittings.

Vacuum Degassing Systems

Custom Solution | Cart Vacuum Degassing System for R&D Products

System Configuration: 24″ DIA x 28″ H Series VI Vertical Cylindrical Industrial Vacuum Chamber, made of 304 stainless steel with hinged lid
and hold down clamps and ISO160 Viewport, Borosilicate Glass, 6″ Viewable area
System Platform: Heavy Duty Cart mounted vacuum degas system including, carbon steel wheeled
cart w/ locking casters, standard cart height
System ports:
Pumping System: Integrated vacuum system with 14 cfm oil sealed two stage rotary vane vacuum pump