Custom Solution | RGA Hard Vacuum Leak Test System for Missile Steering System Components

SKU:

X-032235

Global cybersecurity and missile defense firm required a custom turnkey leak test system to test gas-pressurized missile steering system components. Customer requirements included the ability to test multiple part configurations with multiple gases and operate in a clean room environment.

We engineered a custom, RGA-based leak test system with a PC-based controller that enabled the testing of multiple purge gases and customized data logging and report generation

Custom Solution | RGA Hard Vacuum Leak Test System for Missile Steering System Components

Custom Solution | RGA Hard Vacuum Leak Test System for Missile Steering System Components image 1

Custom Solution | RGA Hard Vacuum Leak Test System for Missile Steering System Components image 2

IndustriesDefense

Single chamber RGA-based leak test system with PC-based control system
Multiple purge gases
Multiple calibrated leak manifold for system calibration using different gases
Customized data logging and report generation

Application:	Leak testing pressurized missile steering system components
Industry:	Defense
Production Volume:	Medium to high
Tracer gas:	RGA
Controller System:	PC-based custom
Leak Test Method:	RGA hard vacuum
Leak Rate:	Dependent on refrigerant
Configuration:	Portable station
Chamber:	Custom vertical cylindrical leak test chamber

IndustriesDefense

Related Products

Helium Sniffing Systems

Automated Helium Sniffing System Cart-Mounted with a TITAN VERSA T Helium Leak Detector

TITAN VERSA (T) Tower Wet Pump

Standard flow evacuation valve
Standard flow vent valve
Voltage supply: 100-120 V
7″ color touch screen
Click here for TITAN VERSA T full details and specifications

ATLAS Controller

Includes basic helium charging with part evacuation, air fill, and helium recovery options
Ability to remotely monitor TITAN VERSA helium leak detector
Up to 100 customized test recipes
7″ Remote HMI with VESA 100 mounting and magnetic mounting
Communication and data logging
Click for more information on the ATLAS Controller

Wet Evacuation Pump

Mobile Production Cart

Swivel and locking casters
Casters can be switched to leveling feet
25 1/8″ L by 30 5/8″ W workspace

Sniffer Probe

Achieves sensitivities up to 1 x 10^-7 atm-cc/sec
Male connector for quick connect/disconnect
Compatible with all Alcatel leak detectors including ASM 142, ASM 180T, ASM 182T, and ASM 340
Includes spare tip and filter
33 feet of hose
Hose extension also available (part number LMSA090216)

Sniffer Leak Standard

Helium Sniffing Systems

Manual Helium Sniffing System Cart-Mounted with a TITAN VERSA TD Helium Leak Detector

TITAN VERSA (TD) Tower

Standard flow evacuation valve
Standard flow vent valve
Voltage supply: 100-120 V
7″ color touch screen
Click here for TITAN VERSA TD full details and specifications

Mobile Production Cart

Swivel and locking casters
Casters can be switched to leveling feet
25 1/8″ L by 30 5/8″ W workspace

Gas Charge Manifold Key Features

Charge Manifold includes Helium fill, Vent and Evac valves to properly perform helium charge process.
Includes the following:
- 0-150 pisg Pressure gauge (with manual setpoint adjust)
- 110 psig Pressure relief valve
- 3′ section of 3/8″ tubing to connect to test object or chamber
Assembly fully leak tested and functionally tested

Sniffer Probe

Achieves sensitivities up to 1 x 10^-7 atm-cc/sec
Male connector for quick connect/disconnect
Compatible with all Alcatel leak detectors including ASM 142, ASM 180T, ASM 182T, and ASM 340
Includes spare tip and filter
33 feet of hose
Hose extension also available (part number LMSA090216)

Sniffer Leak Standard

Helium Sniffing Systems

Automated Helium Sniffing System Cart-Mounted with a TITAN VERSA C Helium Leak Detector

TITAN VERSA (C) Compact

Standard flow evacuation valve
Standard flow vent valve
Voltage supply: 100-120 V
7” color touch screen
Click here for TITAN VERSA C full details and specifications

ATLAS Controller

Includes basic helium charging with part evacuation, air fill, and helium recovery options
Ability to remotely monitor TITAN VERSA helium leak detector
Up to 100 customized test recipes
7″ Remote HMI with VESA 100 mounting and magnetic mounting
Communication and data logging
Click for more information on the ATLAS Controller

Maintenance Cart with Gas Bottle Attachment

Swivel and locking casters
40.8″ W x 25.0″ L x 36.3″ H
Gas bottle bracket holds one T, K, S, or Q size gas cylinder securely

Sniffer Probe

Achieves sensitivities up to 1 x 10^-7 atm-cc/sec
Male connector for quick connect/disconnect
Compatible with all Alcatel leak detectors including ASM 142, ASM 180T, ASM 182T, and ASM 340
Includes spare tip and filter
33 feet of hose
Hose extension also available (part number LMSA090216)

Sniffer Leak Standard

Dry Evacuation Pump

Helium Sniffing Systems

Manual Helium Sniffing System Cart-Mounted with a TITAN VERSA C Helium Leak Detector

TITAN VERSA C

Standard flow evacuation valve
Standard flow vent valve
Voltage supply: 100-120 V
7″ color touch screen
Click here for TITAN VERSA C full details and specifications

Dry Evacuation Pump

Maintenance Cart with Gas Bottle Attachment

Swivel and locking casters
40.8″ W x 25.0″ L x 36.3″ H
Gas bottle bracket holds one T, K, S, or Q size gas cylinder securely

Gas Charge Manifold Key Features

Charge Manifold includes Helium fill, Vent and Evac valves to properly perform helium charge process.
Includes the following:
- 0-150 pisg Pressure gauge (with manual setpoint adjust)
- 110 psig Pressure relief valve
- 3′ section of 3/8″ tubing to connect to test object or chamber
Assembly fully leak tested and functionally tested

Sniffer Probe

Achieves sensitivities up to 1 x 10^-7 atm-cc/sec
Male connector for quick connect/disconnect
Compatible with all Alcatel leak detectors including ASM 142, ASM 180T, ASM 182T, and ASM 340
Includes spare tip and filter
33 feet of hose
Hose extension also available (part number LMSA090216)

Sniffer Leak Standard

Helium Bombing Systems

Automated Helium Bombing System with 10″ x 10″ Chamber Cart-Mounted with a TITAN VERSA TD Helium Leak Detector

System Key Features

Cart mounting
Dry evacuation pump
ATLAS Controller
TITAN VERSA TD helium leak detector

Chamber Key Features

Stainless steel construction
0-30 inHg to 100 psi compound gauge
Operates up to 100 psi
ASME approved for 110 psi

ATLAS Controller Key Features

Includes basic helium charging with part evacuation, air fill, and helium recovery options
Ability to remotely monitor TITAN VERSA helium leak detector
Up to 100 customized test recipes
7″ Remote HMI with VESA 100 mounting and magnetic mounting
Communication and data logging
Click for more information on the ATLAS Controller

TITAN VERSA Key Features

Standard flow evacuation valve
Standard flow vent valve
Voltage supply: 100-120 V
7″ color touch screen
Click for more information on the TITAN VERSA

Cart Key Features

Swivel and locking casters
Casters can be switched to leveling feet
25 1/8″ L by 30 5/8″ W workspace

Helium Bombing Systems

Automated Helium Bombing System with 10″ x 10″ Chamber Cart-Mounted

System Key Features

Cart mounting
Dry evacuation pump
ATLAS Controller

Chamber Key Features

Stainless steel construction
0-30 inHg to 100 psi compound gauge
Operates up to 100 psi
ASME approved for 110 psi

ATLAS Controller Key Features

Includes basic helium charging with part evacuation, air fill, and helium recovery options
Up to 100 customized test recipes
7″ Remote HMI with VESA 100 mounting and magnetic mounting
Communication and data logging
Click for more information on the ATLAS Controller

Cart Key Features

Swivel and locking casters
Casters can be switched to leveling feet
25 1/8″ L by 30 5/8″ W workspace

Helium Bombing Systems

Automated Helium Bombing System with 8″ x 3″ Chamber Cart-Mounted with a TITAN VERSA TD Helium Leak Detector

System Key Features

Cart mounting
Dry evacuation pump
ATLAS Controller
TITAN VERSA TD helium leak detector

Chamber Key Features

Operates up to 100 psi
ASME approved for 110 psi
0-30 inHg to 100 psi compound gauge
Compact and light weight

ATLAS Controller Key Features

Includes basic helium charging with part evacuation, air fill, and helium recovery options
Ability to remotely monitor TITAN VERSA helium leak detector
Up to 100 customized test recipes
7″ Remote HMI with VESA 100 mounting and magnetic mounting
Communication and data logging
Click for more information on the ATLAS Controller

TITAN VERSA Key Features

Standard flow evacuation valve
Standard flow vent valve
Voltage supply: 100-120 V
7″ color touch screen
Click for more information on the TITAN VERSA

Cart Key Features

Swivel and locking casters
Casters can be switched to leveling feet
25 1/8″ L by 30 5/8″ W workspace

Helium Bombing Systems

Automated Helium Bombing System with 3″ x 6″ Chamber Cart-Mounted with a TITAN VERSA TD Helium Leak Detector

System Key Features

Cart mounting
Dry evacuation pump
ATLAS Controller
TITAN VERSA TD helium leak detector

Chamber Key Features

Operates up to 60 PSI
Rear connection port
0-30 inHg to 100 psi compound gauge

ATLAS Controller Key Features

Includes basic helium charging with part evacuation, air fill, and helium recovery options
Ability to remotely monitor TITAN VERSA helium leak detector
Up to 100 customized test recipes
7″ Remote HMI with VESA 100 mounting and magnetic mounting
Communication and data logging
Click for more information on the ATLAS Controller

TITAN VERSA Key Features

Standard flow evacuation valve
Standard flow vent valve
Voltage supply: 100-120 V
7″ color touch screen
Click for more information on the TITAN VERSA

Cart Key Features

Swivel and locking casters
Casters can be switched to leveling feet
25 1/8″ L by 30 5/8″ W workspace

Helium Bombing Systems

Manual Helium Bombing System with 10″ x 10″ Chamber Cart-Mounted with a TITAN VERSA TD Helium Leak Detector

System key features

Cart mounted system
Dry diaphragm evacuation pump
Gas charge manifold
TITAN VERSA TD dry pump helium leak detector

Cart key features

Swivel and locking casters
- Casters can be switched to leveling feet
25 1/8″ L x 30 5/8″ W workspace

Chamber key features

Stainless steel construction
0-30 inHg to 100 psi compound gauge
Operates up to 100 psi
ASME approved for 110 psi

Gas charge manifold key features

Charge manifold includes Helium fill, Vent and Evac valves to properly perform helium charge process.
Includes the following:
- 0-150 pisg Pressure gauge (with manual setpoint adjust)
- 75 psig Pressure relief valve
- 3′ section of 3/8″ tubing to connect to test object or chamber
Assembly fully leak tested and functionally tested

Titan Versa Key Features

Standard flow evacuation valve
Standard flow vent valve
Voltage supply: 100-120 V
7″ color touch screen
Click for TITAN VERSA TD full specifications

Helium Bombing Systems

Manual Helium Bombing System with 14″ x 16″ Chamber

Chamber key features:

Stainless steel construction
0-30 inHg to 100 psi compound gauge
Operates up to 100 psi
ASME approved for 110 psi

Gas charge manifold key features:

Charge Manifold includes Helium fill, Vent and Evac valves to properly perform helium charge process.
Includes the following:
- 0-150 pisg Pressure gauge (with manual setpoint adjust)
- 75 psig Pressure relief valve
- 3′ section of 3/8″ tubing to connect to test object or chamber
Assembly fully leak tested and functionally tested.

Helium Bombing Systems

Manual Helium Bombing System with 10″ x 10″ Chamber Baseplate-Mounted

System key features

Baseplate mounting
Dry diaphragm evacuation pump
Gas charge manifold

Chamber key features

Stainless steel construction
0-30 inHg to 100 psi compound gauge
Operates up to 100 psi
ASME approved for 110 psi

Gas charge manifold key features

Charge Manifold includes Helium fill, Vent and Evac valves to properly perform helium charge process.
Includes the following:
- 0-150 pisg Pressure gauge (with manual setpoint adjust)
- 75 psig Pressure relief valve
- 3′ section of 3/8″ tubing to connect to test object or chamber
Assembly fully leak tested and functionally tested.

Helium Bombing Systems

Manual Helium Bombing System with 8″ x 3″ Chamber Baseplate-Mounted

System key features

Baseplate mounting
Dry diaphragm evacuation pump
Gas charge manifold

Chamber key features

Operates up to 100 psi
ASME approved for 110 psi
0-30 inHg to 100 psi compound gauge
Compact and lightweight

Gas charge manifold key features

Charge Manifold includes Helium fill, Vent and Evac valves to properly perform helium charge process.
Includes the following:
- 0-150 pisg Pressure gauge (with manual setpoint adjust)
- 75 psig Pressure relief valve
- 3′ section of 3/8″ tubing to connect to test object or chamber
Assembly fully leak tested and functionally tested.

Helium Hard Vacuum Systems

Custom Solution | Helium Hard Vacuum Leak Test System for HVAC Compressors

Low cost horizontal cylindrical chamber with dual doors and integration to production line roller conveyor
Simple operator loading with pallet
Gas booster and custom software to mix and boost test gas
Integrated air proof test to 300 psia
Calibrated leak with master part to calibrate and validate the test
Enclosed pumping system to reduce noise

Helium Hard Vacuum Systems

Custom Solution | Multi-Chamber FLEXSTATION Leak Test System for Auto A/C Hose

FLEXSTATION helium leak test system
Multiple custom machine billeted aluminum vacuum chambers

Helium Hard Vacuum Systems

Custom Solution | High Volume Automated Leak Test System for Airbag Inflators

Application: Airbag inflator testing
Industry: Automotive
Automated part sorting and marking
Feed and exit conveyors
Universal grippers for different part models

Helium Hard Vacuum Systems

Custom Solution | Helium Hard Vacuum Leak Test System for High Pressure Gas Storage Tanks

Automated tank connection with quick disconnect valve on head stock (No internal hose).
Pneumatically actuated connector at end of chamber to interface with the tank head stock
to seal and supply test tracer gas.

Helium Hard Vacuum Systems

Custom Solution | Helium Hard Vacuum Leak Test System for Airbag Inflators

High sensitivity vacuum decay capability
Auxiliary pumping system for high performance and speed
Dual helicoptor pick and place material handling system integrated to conveyor
Automated part sorting and communication to RFID on pallet
Universal grippers for different part models

Helium HATS Accumulation Leak Test System for Airbag Inflators

Accumulation Leak Test Systems

Custom Solution | Helium HATS Leak Test System for Airbag Inflator Components

Leak Test Method: Automated helium accumulation
Application: Helium accumulation test for airbags in high-volume inflator production
Industry: Automotive & Transportation

Requirements

Support high-volume testing of airbag inflators
Reduce contamination from lubrication residues
Minimize maintenance and downtime
Automate the leak test process for consistent results
Include calibration and validation capability

Our Solution

Automated helium accumulation test for airbags combining charging, accumulation, and measurement
Sealed test chamber design prevents contamination and improves reliability
Built-in calibration and validation maintain long-term accuracy
Data logging and automated control improve repeatability and traceability
Durable construction supports continuous production use

Helium Accumulation Leak Test for Satellite Propulsion

Accumulation Leak Test Systems

Custom Solution | Helium Accumulation Leak Test System for Satellite Propulsion Modules

Helium Accumulation Test for Satellites
Custom engineered accumulation chamber with mixing fans
Helium mass spectrometer leak detector with sniffer probe integrated to chamber
PC-controlled system with datalogging
Integrated helium calibrated leak standard for calibration and verification

Helium Accumulation Leak Test for Fuel Filler Pipes

Accumulation Leak Test Systems

Custom Solution | Helium Accumulation Leak Test System for Fuel Filler Pipes

Accumulation system with a unique gas re-circulation system
Integration of two systems to one leak detector and controller for cost efficiency
Standard tooling platform for simple chamber/fixture upgrades
System designed with locking casters for quick production line layout changes
Integrated helium calibrated leak standard for calibration and verification

Helium Hard Vacuum Systems

Custom Solution | FLEXSTATION Leak Test System for Air Brake Actuators

Custom tooling for to fit multiple models of air brake actuators for trucks and buses.
FLEXSTATION configurable software and hardware

Helium Hard Vacuum Systems

Custom Solution | Coffin-Style Leak Test System for Auto A/C Hose

Universal vacuum test chamber with internal hoses and interchangeable connectors
Automated chamber opens and closes with safety light curtains
Automated calibration with helium supply and calibrated leak

Helium Hard Vacuum Systems

Custom Solution | Leak Test System for Auto Air Suspension Reservoirs

Operator loaded test chamber with hard tooling that opens valve upon sealing
Innovative ink marking system to mark passing parts while in the vacuum chamber
Integrated Zebra label printer
Leak test reservoir with built-in Schrader valve for fast cycle times

Helium Hard Vacuum Systems

Custom Solution | Helium Hard Vacuum Leak Test System for Auto A/C Hose

Universal vacuum test chamber for a wide variety of test parts
Automated chamber open and close with safety light curtains
Automated calibration with helium supply and calibrated leak

Helium Hard Vacuum Systems

Custom Solution | Leak Test System for Airbag Diffusers

Dual vacuum test chambers and leak detectors for high speed
Automated chamber open and close with safety light curtains
Automated calibration with helium supply and calibrated leaks built into dummy parts

Accumulation Leak Test Systems

Custom Solution | SF6 Accumulation Leak Test System for High Voltage Switchgear

SF6 accumulation test for switchgear
SF6 (sulfur hexafloride gas) accumulation leak test chamber
Adjustable mixing fans
Purging capability
Pallet forklift loading capability

Non-Helium Tracer Gas Systems

Custom Solution | Non-Helium (Refrigerant) Leak Test System for Auto A/C Connectors

Multi-chamber leak test system with PC-based control system
Design to allow remote mounting of test chamber in temperature chamber
Calibrated leak port to attach different refrigerant calibrated leaks for system calibration

Non-Helium Tracer Gas Systems

Custom Solution | Non-Helium (Refrigerant) Leak Test System for Refrigerant Control Valves

Dual chamber RGA-based leak test system
Batch testing
Multiple calibrated leak manifold for system calibration

Helium Bombing Systems

Manual Tabletop Helium Bombing Station

ASME approved for 110 psi
Setup is helium leak tested to less than 10^-9 atm-cc/sec
Includes Certificate of Conformance
Tabletop base (15″ W x 16″ L)

Helium Hard Vacuum Systems

Custom Solution | Leak Test System for Heat Exchangers

High pressure, pneumatic operated pressure booster system to achieve test pressures and optimize helium usage
L-style cradle feet to support chamber, mounted on mobile cart
Cladded vacuum chamber and reusable pressure relief vent
Designed to effortlessly open and close with pneumatic operated clamps
Designed with slide out shelf for easy loading/unloading of parts
PC-based LabView application with custom reports

Helium Hard Vacuum Systems

Custom Solution | Leak Test System for Refrigeration Compressors

Heavy-duty slide-out tray for easy product loading
Pressure booster and integrated gas mixer to minimize use of helium
Helium sniffer probe for pinpointing leak failures

Vacuum Chambers

Custom Solution | Bombing and Leak Test Chambers for Military & Defense Components

Bombing Chamber

3-gallon internal capacity
Top-opening lid with 5 7/8″ x 4 7/8″ oval size
Manual valves for helium and vacuum connections
Safety pressure relief valve set to 75 psig

Leak Test Chamber

304 SS body and lid with glass bead blast finish
Hinged lid with L-gasket seal
Flat bottom NW 40 port for leak detector inlet

Custom Dual Chamber Helium Bombing System

Helium Bombing Systems

Custom Solution | Dual Chamber Helium Bombing System

Two 304 stainless steel bombing chambers with electropolished finish with fully removable, clamped lid suitable for both vacuum and pressure
ASME approved for 110 psi
ATLAS Tracer Gas Charge System and Leak Test Process Controller for automated control of bombing process for both helium bombing chambers with multiple user-defined recipe parameters

Production Leak Test Systems

Custom Solution | Pre-Leak Test Evacuation System

Multiple vacuum chambers with the valve manifold
Digital operator interface to easily process the parts.

Automated Helium Bombing Station for Medical Circuit Trays

Helium Bombing Systems

Custom Solution | Automated Helium Bombing Station for Medical Grade Circuit Trays

Two independent 9.5″ DIA X 9.5″ H ASME pressure bombing chambers with fully removeable lid and clamps suitable for vacuum or pressure
Two ATLAS Tracer Gas Charge System and Leak Test Process Controllers for each bombing chamber.
Laptop on slide-out support mounts integrated with barcode scanners and Atlas Controller for streamlined data logging
Two lid support shelves for chamber loading and unloading
Electropolish finish compatible with clean room environment and medical grade applications

Helium Accumulation Leak Test System for Bioprocess Containers

Production Leak Test Systems

Custom Solution | TITANTEST Leak Test System for Bioprocess Containers

Helium tracer gas
Dual clamshell-type aluminum test chambers
Automated sniffing accumulation test method
Fast cycle times
High sensativity