A manufacturer of capacitors for military, energy, and aerospace applications required a bombing chamber system. Using our ATLAS™ Leak Test Process Controller we engineered a fully automated, PLC controlled dual chamber helium bombing system.
| Chamber Material: | 304 stainless steel |
| Finish: | Electropolish |
| Dimensions: | 9.5″ ID x 9.5″ IH, 17-1/4″ OH |
| Lid: | Fully removable with handle and full size opening. Swing clamped lid suitable for both full vacuum or pressure |
| Operating Pressure: | Chamber is leak and pressure tested for full vacuum and operating pressures to 100 psi |
| Ports: | 1/4″ port on cross with manual valve adapted to NW 25 vacuum flange for evacuation, 1/4″ port on cross for helium fill manual valve to connect to regulated helium supply, 1/4″ port on cross for manual valve for venting chamber, spare 3/4″ NPT port on chamber bottom, blanked off, safety overpressure relief valve installed and set to 100 psi |
| Gauge: | Manual analog 2.5″ face pressure gauge from 0-30 inHG and 0-100 psi |
| Pumping System: | LACO Model UN-200VH Dry Vacuum Pump (4.4 CFM) (has been replaced with UN-250VH) |
| Controller: | Atlas™ Leak Test Process Controller |
| Configuration: | Cart |
This ATLAS Leak Test Process Controller configuration is ideal for users who need either automated helium bombing charge control or automated pre-fill of their parts before leak testing. The ATLAS Controller allows for fully automated part charging process, up to...
LACO’s UN-250VH Dry Piston Vacuum Pump (formerly the UN-200VH) features an oil- and water-free design ideal for non-corrosive applications. At 125 L/min, this powerful pump is ideal for moderate to heavy duty applications where a clean room environment is required....
