Custom Solution | Custom Bombing System for Fusing & Ordnance Components Cart-Mounted

System Key Features

• Cart mounting
• Dry evacuation pump
• ATLAS Controller
• TITAN VERSA TD helium leak detector

Chamber Key Features

• Stainless steel construction
• 0-30 inHg to 100 psi compound gauge
• Operates up to 100 psi
• ASME approved for 110 psi

ATLAS Controller Key Features

• Includes basic helium charging with part evacuation, air fill, and helium recovery options
• Ability to remotely monitor TITAN VERSA helium leak detector
• Up to 100 customized test recipes
• 7″ Remote HMI with VESA 100 mounting and magnetic mounting
• Communication and data logging
• Click for more information on the ATLAS Controller

TITAN VERSA Key Features

• Standard flow evacuation valve
• Standard flow vent valve
• Voltage supply: 100-120 V
• 7″ color touch screen
• Click for more information on the TITAN VERSA

Cart Key Features

• Swivel and locking casters
• Casters can be switched to leveling feet
• 25 1/8″ L by 30 5/8″ W workspace

System Key Features

• Cart mounting
• Dry evacuation pump
• ATLAS Controller

Chamber Key Features

• Stainless steel construction
• 0-30 inHg to 100 psi compound gauge
• Operates up to 100 psi
• ASME approved for 110 psi

ATLAS Controller Key Features

• Includes basic helium charging with part evacuation, air fill, and helium recovery options
• Up to 100 customized test recipes
• 7″ Remote HMI with VESA 100 mounting and magnetic mounting
• Communication and data logging
• Click for more information on the ATLAS Controller

Cart Key Features

• Swivel and locking casters
• Casters can be switched to leveling feet
• 25 1/8″ L by 30 5/8″ W workspace

System Key Features

• Cart mounting
• Dry evacuation pump
• ATLAS Controller
• TITAN VERSA TD helium leak detector

Chamber Key Features

• Operates up to 100 psi
• ASME approved for 110 psi
• 0-30 inHg to 100 psi compound gauge
• Compact and light weight

ATLAS Controller Key Features

• Includes basic helium charging with part evacuation, air fill, and helium recovery options
• Ability to remotely monitor TITAN VERSA helium leak detector
• Up to 100 customized test recipes
• 7″ Remote HMI with VESA 100 mounting and magnetic mounting
• Communication and data logging
• Click for more information on the ATLAS Controller

TITAN VERSA Key Features

• Standard flow evacuation valve
• Standard flow vent valve
• Voltage supply: 100-120 V
• 7″ color touch screen
• Click for more information on the TITAN VERSA

Cart Key Features

• Swivel and locking casters
• Casters can be switched to leveling feet
• 25 1/8″ L by 30 5/8″ W workspace

System Key Features

• Cart mounting
• Dry evacuation pump
• ATLAS Controller
• TITAN VERSA TD helium leak detector

Chamber Key Features

• Operates up to 60 PSI
• Rear connection port
• 0-30 inHg to 100 psi compound gauge

ATLAS Controller Key Features

• Includes basic helium charging with part evacuation, air fill, and helium recovery options
• Ability to remotely monitor TITAN VERSA helium leak detector
• Up to 100 customized test recipes
• 7″ Remote HMI with VESA 100 mounting and magnetic mounting
• Communication and data logging
• Click for more information on the ATLAS Controller

TITAN VERSA Key Features

• Standard flow evacuation valve
• Standard flow vent valve
• Voltage supply: 100-120 V
• 7″ color touch screen
• Click for more information on the TITAN VERSA

Cart Key Features

• Swivel and locking casters
• Casters can be switched to leveling feet
• 25 1/8″ L by 30 5/8″ W workspace

System key features

• Cart mounted system
• Dry diaphragm evacuation pump
• Gas charge manifold
• TITAN VERSA TD dry pump helium leak detector

Cart key features

• Swivel and locking casters
  • Casters can be switched to leveling feet
• 25 1/8″ L x 30 5/8″ W workspace

Chamber key features

• Stainless steel construction
• 0-30 inHg to 100 psi compound gauge
• Operates up to 100 psi
• ASME approved for 110 psi

Gas charge manifold key features

• Charge manifold includes Helium fill, Vent and Evac valves to properly perform helium charge process.
• Includes the following:
  • 0-150 pisg Pressure gauge (with manual setpoint adjust)
  • 75 psig Pressure relief valve
  • 3′ section of 3/8″ tubing to connect to test object or chamber
• Assembly fully leak tested and functionally tested

Titan Versa Key Features

• Standard flow evacuation valve
• Standard flow vent valve
• Voltage supply: 100-120 V
• 7″ color touch screen
• Click for TITAN VERSA TD full specifications

Chamber key features:

• Stainless steel construction
• 0-30 inHg to 100 psi compound gauge
• Operates up to 100 psi
• ASME approved for 110 psi

Gas charge manifold key features:

• Charge Manifold includes Helium fill, Vent and Evac valves to properly perform helium charge process.
• Includes the following:
  • 0-150 pisg Pressure gauge (with manual setpoint adjust)
  • 75 psig Pressure relief valve
  • 3′ section of 3/8″ tubing to connect to test object or chamber
• Assembly fully leak tested and functionally tested.

System key features

• Baseplate mounting
• Dry diaphragm evacuation pump
• Gas charge manifold

Chamber key features

• Stainless steel construction
• 0-30 inHg to 100 psi compound gauge
• Operates up to 100 psi
• ASME approved for 110 psi

Gas charge manifold key features

• Charge Manifold includes Helium fill, Vent and Evac valves to properly perform helium charge process.
• Includes the following:
  • 0-150 pisg Pressure gauge (with manual setpoint adjust)
  • 75 psig Pressure relief valve
  • 3′ section of 3/8″ tubing to connect to test object or chamber
• Assembly fully leak tested and functionally tested.

System key features

• Baseplate mounting
• Dry diaphragm evacuation pump
• Gas charge manifold

Chamber key features

• Operates up to 100 psi
• ASME approved for 110 psi
• 0-30 inHg to 100 psi compound gauge
• Compact and lightweight

Gas charge manifold key features

• Charge Manifold includes Helium fill, Vent and Evac valves to properly perform helium charge process.
• Includes the following:
  • 0-150 pisg Pressure gauge (with manual setpoint adjust)
  • 75 psig Pressure relief valve
  • 3′ section of 3/8″ tubing to connect to test object or chamber
• Assembly fully leak tested and functionally tested.

System key features

• Baseplate mounting
• Dry diaphragm evacuation pump
• Gas charge manifold

Chamber key features

• Operates up to 60 psi
• Rear connection port
• 0-30 inHg to 100 psi compound gauge

Gas charge manifold key features

• Charge Manifold includes Helium fill, Vent and Evac valves to properly perform helium charge process.
• Includes the following:
  • 0-150 pisg Pressure gauge (with manual setpoint adjust)
  • 75 psig Pressure relief valve
  • 3′ section of 3/8″ tubing to connect to test object or chamber
• Assembly fully leak tested and functionally tested.

Chamber Key Features

• Stainless steel construction
• 0-30 inHg to 100 psi compound gauge
• Operates up to 100 psi
• ASME approved for 110 psi

Gas Charge Manifold Key Features

• Charge manifold includes helium fill, vent, and evac valves to properly perform helium charge process.
• Includes the following:
  • 0-150 pisg pressure gauge (with manual setpoint adjust)
  • 110 psig pressure relief valve
  • 3′ section of 3/8″ tubing to connect to test object or chamber
• Assembly fully leak-tested and functionally tested

Chamber Key Features

• 10″ x 10″ Manual Helium Bombing Chamber
• Stainless steel construction
• 0-30 inHg to 100 psi compound gauge
• Operates up to 100 psi
• ASME approved for 110 psi

Gas Charge Manifold Key Features

• Charge manifold includes helium fill, vent, and evac valves to properly perform helium charge process.
• Includes the following:
  • 0-150 pisg pressure gauge (with manual setpoint adjust)
  • 110 psig pressure relief valve
  • 3′ section of 3/8″ tubing to connect to test object or chamber
• Assembly fully leak-tested and functionally tested

Chamber Key Features

• Operates up to 100 psi
• ASME approved for 110 psi
• 0-30 inHg to 100 psi compound gauge
• Compact and light weight

Gas Charge Manifold Key Features

• Charge manifold includes helium fill, vent, and evac valves to properly perform helium charge process.
• Includes the following:
  • 0-150 pisg pressure gauge (with manual setpoint adjust)
  • 110 psig pressure relief valve
  • 3′ section of 3/8″ tubing to connect to test object or chamber
• Assembly fully leak-tested and functionally tested.

• ASME approved for 110 psi
• Setup is helium leak tested to less than 10^-9 atm-cc/sec
• Includes Certificate of Conformance
• Tabletop base (15″ W x 16″ L)

• Two 304 stainless steel bombing chambers with electropolished finish with fully removable, clamped lid suitable for both vacuum and pressure
• ASME approved for 110 psi
• ATLAS Tracer Gas Charge System and Leak Test Process Controller for automated control of bombing process for both helium bombing chambers with multiple user-defined recipe parameters

• 10″ X 10″ Bombing Chamber features stainless steel construction, completely removable lid with large opening, 3 – 1/4″ NPT ports on cross-for supply, evacuation and vent, and a 0-30 inHg to 100 psi compound gauge. The chamber operates up to 100 psi, and is ASME stamped and approved for 110 psi.
• ATLAS™ Leak Test Process Controller with helium charging with part evacuation, air fill, and helium fill options and up to 100 customized test recipes (see product link for full specifications)
• System components shipped for on-site assembly on customer workstation

• Two 10″ X10″ Leak Test ASME Pressure Bombing Chambers (100 PSI)
• ATLAS Leak Test Process Controller – a flexible controller for helium charging, evacuation, airproof testing, and decay testing of products. Features include:
  • Ethernet interface and remote control (RS232)
  • Enter test ID data manually or via bar code
  • Test summary log or live data stream to CSV file
  • Retrieve data by SD card or Ethernet connection
  • Data storage capacity of over 5 million test results via an internal 8GB SD card

Chamber Key Features

• 3″ DIA x 6″ L chamber
• Operates up to 60 psi
• Rear connection port
• 0-30 inHg to 100 psi compound gauge

Gas Charge Manifold Key Features

• Charge manifold includes helium fill, vent, and evac valves to properly perform helium charge process.
• Includes the following:
  • 0-150 pisg pressure gauge (with manual setpoint adjust)
  • 75 psig pressure relief valve
  • 3′ section of 3/8″ tubing to connect to test object or chamber
• Assembly fully leak-tested and functionally tested.