The 14″ DIA x 16″ H vertical manual helium bombing system includes the essential features to helium bomb. This system includes:
Chamber key features:
Gas charge manifold key features:
| Chamber Specifications | |
|---|---|
| Material | 304 stainless steel with electro-polished finish |
| Dimensions | 14″ DIA x 16″ H, vertical chamber |
| Chamber Weight | 35 lbs |
| Pressure Rating | Full vacuum and pressures up to 100 psi |
| Gauge | Compound pressure gauge 2.5″ face, 0-30 inHG to 100 psi |
| Chamber Ports | 3/4″ npt with 3/8″ tube connection, located at bottom of chamber. 1-1/4″ npt capped port, 1/2″ npt plugged port. |
| Gas Charge Manifold Specifications | |
| Manifold Material | Black Anodized Aluminum |
| Max Pressure | 60 psig |
| Pressure Relief Valve Rating | 75 psig |
| Helium Fill Valve | Ball valve (1/4″ npt) with 1/4″ tube connection (includes 3′ of tubing) |
| Vent Valve | Ball valve (1/4″ npt) with 1/4″ tube connection (includes 3′ of tubing) |
| Evac Valve | Ball valve (1/4″ npt) with NW16 connection |
| Evac Pump Specifications | |
| Pump | Dry diaphragm pump |
| Pump Speed | 1.8 m3/h (1.06 CFM) |
| Voltage | 24 VDC |
| Electrical Specifications | |
| 100-120 VAC Connection | Nema 5-15 |
| 208-240 VAC Connection | Pigtail with IEC C13 |
| Electrical Supply | 1.5 Amps |
The 14″ DIA X 16″ H vertical helium bombing chamber is designed for pressurizing large parts for helium bombing applications. LACO’s Manual Gas Charge Manifold provides all features to evac, fill, and vent the chamber. The chamber is electropolished 304 stainless steel construction and has a removable clamped lid. The chamber is ASME certified and operates up to 100 psig and full vacuum and is helium leak tested.
The Tracer Gas Charge Manifold provides manual tracer gas control for a wide range of leak testing applications, including vacuum inside-out, vacuum bombing, vacuum outside-in, sniffing, sniffing accumulation, and calibrated leak standard recharge. Available in 60, 100, or 150 psig...
Bombing Chamber
Leak Test Chamber
