This bottle of Flushing Fluid contains exact amount of fluid (325ml) to perform a pump flush of LACO’s TVT leak detector. Simply pour the fluid into the pump without worry about the exact amount.
LACO FF Grade vacuum pump flushing fluid is designed to assist in the internal cleaning of particles and sludge build-up in mechanical vacuum pumps. Using FF Grade Flushing Fluid after change your oil as part of your regular pump maintenance will ensure your vacuum pump is free of contaminants. Low viscosity helps free contamination from internal parts and discharge it through the drain valve.
Using FF Grade Flushing Fluid
Vacuum pump fluid must be changed at regular intervals in order remove contaminants that have collected in the fluid and to restore lubricity.
1. When the pump oil is ready to be changed, drain the oil from the pump.
2. Fill the pump with FF Grade Flushing Fluid and run the pump for 10 minutes.
3. Drain all flushing fluid through the drain valve and fill with clean oil.
Benefits
- Lower viscosity frees contamination from internal parts
- Extend pump life through regular use after ever oil change
LACO vacuum fluids are superior quality molecularly distilled vacuum pump oils engineered to perform and provide the ultimate protection from wear that causes pump repairs and pump failures. Lab tests reveal superior performance such as viscosity change and sediment weight when tested against competitive brand oils, outlasting and outperforming other vacuum oils.
All prices are in US$. Website pricing is good only for the USA. Please call for International pricing.
Resources
